Electrical Cutting
Cutting of unbound sheets
Cutting of unbound sheets
Onglematics 6
- The Onglematics 6 allow you to cut documents that are not (or not yet) bound
- You can choose among 4 models of Onglematics 6, according to the formats and quantities of sheets you want to cut (see characteristics)
| Reference | Number of tabs |
Format (sheet size) |
Tabs of variable lengths | Automatic sheet clamp | Number of 80 g sheets | Size and weight |
| O6A4 | 2 to 31 | 210 and 297 mm | 20-25 | 68 x 36 x 37 cm 25 kg |
||
| O6A4 GP | 2 to 31 | 210 and 297 mm | x | 35-40 | 68 x 36 x 37 cm 40 kg |
|
| O6P+ | 2 to 31 | all formats up to 320 mm |
x | 20-25 | 68 x 36 x 37 cm 25 kg |
|
| O6P+ GP | 2 to 31 | all formats up to 320 mm |
x | x | 35-40 | 68 x 36 x 37 cm 40 kg |
- Digital adjustment.
- Storage of up to 64 programs (for the Onglematic O6P+ and O6P+ GP)
- Automatic cutting by foot switch activation
- Automatic advance or manual advance after each cut
- Can cut 70 g, 180 g, 250 g, 500 g sheets , cardboard and polypropylene
- Safety : everybody works safely, as there is no access to the blades
- Productivity : 500 sets of 9 tabs can be cut in less than 2 hours with the Onglematics 6A4 and 6P+
and in less than 1 hour with the Onglematics 6A4 GP and 6P+ GP (220 g sheets) - 220 V mains supply (110 V upon request)
Tab shapes :
- Inclined 15° angle (standard)
- Optional (interchangeable) : 90° angle or round corners (appliance N° 2, 4, 5 or 6)
| Appliance 1 | Appliance 2 | |
| Standard (15° angle) | 90° angle | Round corner |
 |
 |
 |
| Up to 19 mm | Up to 19 mm | Up to 19 mm |
| Appliance 4 | Appliance 5 | Appliance 6 | |
| Double round corner |
Inclined double round corner |
Inclined round corner |
|
 |
 |
 |
|
| 10, 12, 14 or 17 mm | 12,7 , 15 or 19 mm | Up to 19 mm | |
Onglematics 6 while running
Onglematics 6
To play this video, you need the Flash Player plug-in (version 8 or later version)
Onglematics 6 user guide
Example for tabs of same lengths.
| Step 1 | Step 2 |
 |
 |
| The Onglematic 6 can cut unbound sheets. | The length of the document and the number of tabs are selected. So, the positioning stop goes to the first position to cut the first chapter. |
| Step 3 | Step 4 |
 |
 |
| The sheets of the first chapter are placed on the table, against the left stop. By pressing the treadle, the knives cut the first chapter. | Here is the first cut chapter. |
| Step 5 | Step 6 |
 |
 |
| After the first cut, the left stop goes to the second position to cut the second chapter. This second chapter is placed on the table and is cut by pressing on the treadle. | Here is the second cut chapter. |
| Step 7 | |
 |
|
| These operations should be carried out again, part by part, up to the penultimate part. In fact, the last chapter remains complete and therefore does not require cutting. |
Optional Work station for Onglematics 6
- Adjustable level to work standing up or seated
- With lateral side tables to place documents
- Delivered for self assembly
- Optional : four wheels
