Electrical Cutting
Cutting of bound documents or unbound sheets
Cutting of bound documents or unbound sheets
Onglematics 7
- The Onglematics 7 allow you to cut bound documents or unbound sheets.
- You can choose among 4 models of Onglematics 7, according to the formats and quantities of sheets you want to cut (see characteristics)
- To cut already bound documents : use the removable clamping device
- To cut unbound sheets : use the flat table
| Reference | Number of tabs |
Format (sheet size) |
Tabs of variable lengths | Automatic sheet clamp | Number of 80 g sheets | Size and weight |
| O7A4 | 2 to 31 | 210 and 297 mm | 20-25 | 70 x 52 x 96 cm 45 kg |
||
| O7A4 GP | 2 to 31 | 210 and 297 mm | x | 35-40 | 70 x 52 x 96 cm 55 kg |
|
| O7P+ | 2 to 31 | all formats up to 320 mm |
x | 20-25 | 70 x 52 x 96 cm 45 kg |
|
| O7P+ GP | 2 to 31 | all formats up to 320 mm |
x | x | 35-40 | 70 x 52 x 96 cm 55 kg |
- Digital adjustment
- Storage of up to 64 programs (for the Onglematic O7P+ and O7P+ GP)
- Automatic cutting by foot switch activation
- Automatic advance or manual advance after each cut
- Can cut 70 g, 180 g, 250 g, 500 g sheets , cardboard and polypropylene
- Security : everybody works safely, as there is no access to the blades
- Productivity :
- A bound document of 10 chapters (about 150 pages) is cut in less than one minute with the Onglematics 7A4 or 7P+
- 500 sets of 9 tabs are cut in less than 2 hours with the Onglematics 7A4 and 7P+ and in less than 1 hour with the Onglematics 7A4 GP and 7P+ GP (220 g sheets)
- 220 V mains supply (110 V upon request)
Tab shapes :
- Inclined 15° angle (standard)
- Optional (interchangeable) : 90° angle or round corners (appliance N° 2, 4, 5 or 6)
| Appliance 1 | Appliance 2 | |
| Standard (15° angle) | 90° angle | Round corner |
 |
 |
 |
| Up to 19 mm | Up to 19 mm | Up to 19 mm |
| Appliance 4 | Appliance 5 | Appliance 6 | |
| Double round corner |
Inclined double round corner |
Inclined round corner |
|
 |
 |
 |
|
| 10, 12, 14 or 17 mm | 12,7 , 15 or 19 mm | Up to 19 mm | |
Onglematics 7 while running
Onglematics 7
To play this video, you need the Flash Player plug-in (version 8 or later version)
Onglematics 7 user guide
| Step 1 | Step 2 |
 |
 |
| The Onglematics 7 allow to cut bound documents. | The length and the number of tabs are selected on the keyboard and automatically, the moving part goes to the first position to cut the first chapter. |
| Step 3 | Step 4 |
 |
 |
| The document is held by the clamping device all along its cutting. The first chapter is cut, and is then withdrawn in the appropriate area. | Automatically, the moving part goes to the second position, the second chapter is cut, and withdrawn in the appropriate area. These operations should be carried out again, part by part, up to the penultimate part. In fact, the last chapter remains complete and therefore does not require cutting. |
| Step 5 | |
 |
|
| Here is the entire cut document. |
Optional Work station for Onglematic 7
- Adjustable level to work standing up or seated
- With lateral side tables to place documents
- Delivered for self assembly
- Optional : four wheels
